There are many different types of adhesives available, and having the correct applicator is critical to worker safety and production speed. Below are some examples of some manual adhesive dispensing equipment. For more specific information, contact the sales office nearest you.

 

This versatile ThreeBond dispenser can discharge a very small amount of material very accurately, or it can be used for continuous flow.  Material is put directly into the syringe and discharged by air-pressure. Dimensions - 192 x 138 x 67 (mm) Weight - 2.3 kg  Power - 240 Volts AC Air Source - 0.4~0.5 MPa max.
This system is ideal for applying anaerobic threadlocker or sealant to bolts, screws and pipes. It's small size and light weight make it easy to incorporate into any process. Dimensions - 130 x 80 x 90 (mm) Weight - 0.5 kg Power - 240 VAC Air Source - None
This tube-pump dispenser is excellent for use with instant adhesives because it discharges small amounts of low viscosity materials of 1000cp or less at a very constant rate. Dimensions - 200 x 80 x 90 (mm) Weight - 3 kg Power - 240 VAC Air Source - None
This dispenser forces material by air pressure. A pinch valve controls material discharge. This can be used with UV material by using our tube covers to block off UV light. Dimensions - 400 x 250 x 220 (mm) Weight - 7 kg Power - 240 VAC Air Source - 0.4~0.5 MPa max
This is used to apply high viscosity material from a pail. The high-pressure pump forces materail and a trigger gun discharges it. The wiper plate system makes material changing easy. Continous discharge is possible with the double acting shaft. Dimensions - 370 x 665 x 1500 (mm) Weight - 70 kg Power - 240 Volts AC Air Source - 0.4~0.6 MPa