|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1700 Series (Instant adhesives)
|
|
|
Three Bond 1700 series are one-component, solvent free cyanoacrylate adhesives that bond in seconds between close fitting surfaces.
Commonly referred to as “Superglue” applications include assembly of electronic and electrical equipment, optical equipment, medical apparatus, automotive and avionic components and in the manufacture of leisure items such as angling accessories, toys, musical instruments, sporting equipment, jewellery, and woodwork.
Three Bond offer over 40 types of Cyanoacrylates to meet your requirements.
    |
|
ThreeBond 1741, 1743, 1745 and 1747 constitute our standard cynoacylate range.
- Bonds a wide variety of materials
- Fast Setting
- Extensive viscosity ranges available
|
|
ThreeBond 1731, 1733, 1735, 1737 and 1738 contain an elastomer for improved structural performance versus conventional cyanoacrylate adhesives. Have excellent peel strength and impact resistance.
-
Have moisture resistance and excellent adhesive strength at low temperature.
-
Have excellent workability for large bonding areas.
-
Have excellent adhesive strength for various rubber materials.
-
Extensive viscosity ranges available.
|
|
ThreeBond 1739B is a gel type instant adhesive.
- Fluid but non drip
- Excellent peel strength and impact resistance.
- Reduced stringing effect
- Low odour.
- Moisture resistant
- Excellent adhesive strength at low temperature.
|
|
ThreeBond 1743F supplied in application brush bottles to offer a method which replaces traditional dripping nozzle type systems.
- Low Viscosity
- Balanced curing speed and adhesive strength
- Porous materials such as leather, paper, or concrete
- Controlled application
- Reduced waste
|
|
ThreeBond 1771E/1773E are traditional Cyanoacrylates with the benefit of additional light curing capability. By use of the proprietary photo-anion-polymerization technology developed by ThreeBond, the product can also be cured by irradiation with ultraviolet or visible light. Irradiation speeds the curing in areas where blooming might occur, or in wide gaps where curing is slow.
- Offers a light-curing function in a conventional instant adhesive.
- Instantly cures and bonds between close fitting mating surfaces
- Excess can be cured by irradiation with UV light in seconds
- Irradiation with light prevents blooming.
- Thicker bond lines.
- Anionic polymerization of this product by UV light results in excellent tack free surface curing.
- Can be used instead of adhesives that require an accelerator.
- Has strong adhesive strength for a wide range of materials.
|
|
ThreeBond 1781, 1782, and 1783 are modified cyanoacralates offering improved thermal and impact resistance versus conventional cyanoacrylate adhesives
- Offers excellent resistance to impact and heat.
- Offers excellent adhesive strength for bonding various metals.
- Bonds a wide variety of materials
- Three viscosity types.
|
|
ThreeBond 1785B, 1786, and 1787 are cyanoacrylates modified for fast bonding of insensitive surfaces such as wood and leather. Offer excellent curing speed and thus reduce the time to bond various materials.
- Faster cure time.
- Reduce working hours and increase working efficiency.
- Adhesion to porous surfaces
- Adhesion to a wide variety of materials
- Three Viscosity Types
|
|
ThreeBond 1721D is a modified cyanoacrylate adhesive based on ethoxy ethyl ester. Up to now, conventional instant adhesives have had a characteristic odour and the tendency to turn white (blooming - caused by the condensation of cyanoacrylate vapours around the bondline). It bonds in seconds a wide range of metals, rubbers and plastics, and remains transparent after curing without whitening for cosmetically sensitive applications.
|
ThreeBond 1797 Primer enables bonding to previously difficult plastics such as polyethylene, polypropylene and polyacetal.
ThreeBond 1796B Accelerator ensures complete curing even with thick surface layers or unsuitable bonding conditions such as extremely low air humidity, joining surfaces with residual acids or large gaps ( 0,1 mm).
ThreeBond 17F024 Cleaner can be used to remove excess cured material. Several applications may be necessary
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|