|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1300 Series Anaerobic high-strength sealant
|
|
|
The products in the ThreeBond 1300 Series are anaerobic, extra-strength sealants developed by application of our proprietary technologies. Unlike ordinary sealants and adhesives, these do not cure when exposed to air. Rather, when they penetrate into narrow gaps in metal structures they cure in the absence of air, at room temperature, without contracting. They offer excellent resistance to vibration, heat, and chemical action. They bond the joints or threads of mechanical parts and devices chemically, preventing them from loosening and leaking. Each of them is one-part and non-solvent, and therefore has good workability and is easy to use.
|
|
1303 High-strength studlock.
|
|
1305 High-strength studlock.
|
|
1322G Medium strength
- Low viscosity
- Fixing and sealing of bolts, nuts and screws that may require infrequent removal
|
|
1324 Medium strength nut lock
- Medium Viscosity
- Fixing and sealing of bolts, nuts and screws that may require infrequent removal
|
|
1327 Medium Strength Nut lock
- High Viscosity
- Fixing and sealing of larger bolts, nuts and screws that may require infrequent removal
|
|
1342C Low Strength Screwlock
- Low Viscosity
- Fixing and sealing of bolts, nuts and screws that may require removal
|
|
1344E Low Strength Screwlock
- Medium Viscosity
- Fixing and sealing of bolts, nuts and screws that may require removal
|
|
1360 High Temperature Nutlock (Up to 200ºC)
|
|
1361B Penetrating Type Nutlock
|
|
1368B Very Low Strength Screwlock
|
|
1374 Medium Strength lubricating nutlock
- Medium viscosity
- Fixing of high tension bolts with stabilzed axial force
|
|
1324 Medium strength bearing fit
|
|
1373B Fast Setting retainer
- Low Viscosity
- High strength retaining of parts requiring minimum fixture time
|
|
1375B High Temperature Retainer (Up to 175º C)
- Medium Viscosity
- High strength retaining of parts requiring thermal resistance
|
|
1377B Worn Parts Retainer
- High Viscosity
- High strength retaining of large sized or worn parts
|
|
1386D Plug retainer and sealant
- Medium Viscosity, thixotropic with lubrication
- Medium strength retaining of interference parts including stud pipes and core plugs
|
|
1388 High Torque
- High Viscosity, thixotropic.
- High strength retaining and sealing of large sized or worn parts and flanges.
|
|
Where cure speed is unacceptably long, or large gaps are present, the use of primer TB3095C is recommended to improve the cure speed. This also ensures reliable curing of the adhesive. Primer can be spray, brush or dip applied and must be dry before adhesive is applied. Assembly must then take place within 3 minutes otherwise the parts will require cleaning and retreating.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|