ThreeBond Two-Part Adhesive Dispensing Equipment
Dispensing two part adhesives requires careful attention be paid to get the mix right. In order to have an effective bond, you must control a number of parameters such as material type, pot life, fillers, mixing ratio, viscosity, mixing time, mixing speed, as well as other conditions. ThreeBond constant develops new dispensers and applicators to ensure that you are in total control of these challenges. Below are some examples.
This dispenser accurately controls small amounts of discharge with gear pump, even if the material viscosity fluctuates during a process.
|
Specifications
Dynamic Mixing
Gear Pump - Pumping mechanism
Power - 240 Volt AC
Air Source - None
Dimensions 290 x 228 x 310 (mm)
Weight - 7.5 kg
|
 |
This ThreeBond Silicone dispenser pumps and mixes high viscosity two-part silicone. When used with a robot, this foam bead forms a gasket that has chemical resistance, heat insulation, durability, elasticity and temperature resistance.
|
Specifications
Dynamic Mixing
Screw Pump - Pumping Mechanism
Power - 200 Volt AC (3 Phase)
Air Source 0.5 MPa
|
 |
This dispenser mixes and discharges 2 part UV resin, using a screw pump to control accuracy and a static motor for mixing.
|
Specifications
Static Mixing
Gear Pump - Pumping Mechanism
Power 240 Volt AC
Air Source - None
Dimnensions: 432 x 350 x 600 (mm)
Weight - 7.5kg
|
 |