ThreeBond Silicone Sealant Dispensers 

Silicone sealants are often  difficult to apply to surfaces due to their high viscosity. Silicone sealants are sealed in aluminum tubes, plastic cartridges or pails because they cure on contact with moisture in the air. Some examples of common dispensing products are listed below. For more specific information, contact the sales office nearest you.

 

This gun has a simple sturdy construction, permitting easy operation.  It is normally used for dispensing material in cartridges, but with a special attachment, it can be used for tubes. Dimensions - 180 x 300 x 70 (mm) Weight - 250 g Power - None Air Source - 0.4 MPa max.
This dispenser discharges material from tubes. The quantity of discharge is easily controlled by pressure and time. Dimensions - 192 x 138 x 67 (mm) Weight - 2.3 kg Power - 240 VAC Air Source - 0.4-0.5 MPa max.
A cartridge is set in a plastic cylinder and the material is forced out by air pressure. This dispenser has a simple, sturdy construction, permitting easy operation. It is comparatively inexpensive. Dimesnsions  - 180 x 300 x 70 (mm) Weight  - 250g Power - None Air Source  - 0.4 MPa max.
A cartridge is set in an aluminum cartridge tank and is force-fed by air pressure. Pull the lever on the pencil gun to discharge the sealant. Dimesnsions  - 100 x 100 x 300 (mm) Weight  - 3 kg Power  - None Air Source  - 0.4 MPa max.
This gear pump dispenser can discharge a very small amount of adhesive with medium viscosity at a constant rate. It needs only a 240VAC power supply. Dimesnsions  - 270 x 250 x 108 (mm) Weight  - 4.5 kg Power  - 240 VAC Air Source  - None
This dispenser is used for high-viscosity silicone in a pail. A high pressure pump forces material and a trigger gun discharges material. Exchanging material is simplified with our wiper plate system. This system can discharge continuously. Dimesnsions  - 420 x 665 x 1656 (mm) Weight  - 90 kg Air Source  - 0.4 ~ 0.6 MPa max.